Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D

Notice
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
<-- Date Index --> <-- Thread Index --> [Author Index]

RE: Drum Processing of HSI?


  • From: Theo Benson <TBenson@xxxxxxxxxxxxx>
  • Subject: RE: Drum Processing of HSI?
  • Date: Mon, 27 Jul 1998 14:15:35 -0700

David:

I use Besseler drums for my 4x5 HIE, and found that they were light tight to
IR. By experimenting, I found that I should cut my development time by about
10% to allow for continuous agitation (but that was at 68F -- I use an ice
bath to lower the developer temp from tap water that is often 76F or
higher). I recommend cutting an exposed sheet of film into four strips, and
then processing each one for +/- 10% and +/- 20% to see what works the best
(and also confirm that the drums are light tight). I DO love the chemistry
savings that my drums give me!

Theo Benson

> -----Original Message-----
> From:	David N. Horn [SMTP:dh@xxxxxxxxxxxxx]
> Sent:	Monday, July 27, 1998 1:24 PM
> To:	infrared@xxxxx; dh@xxxxxxxxxxxxx
> Subject:	Drum Processing of HSI?
> 
> I would like to process Kodak 4 by 5 HSI film using a drum and D76. Can
> anyone suggest  a good development time?
> The drum is a UNI-color drum, and can take two sheets of 5 by 7 or four
> sheets of 4 by 5.
> To keep the film wet, I will have to keep it rolling continuously. I
> assume
> this will reduce the development time from the Kodak recommended
> 9.5 minites at 72 degrees F (my basement temperature).
> My main reason for using a drum is to reduce the amount of chemistry,
> from the 1.6 Litres my tank takes.
> Do I also have to worry about the Uni-color drum leaking IR?
> Any pointers apreciated!
> 
> Dave Horn
> 
> *
> ****
> *******
> ******************************************************
> *  To remove yourself from this list, send:          *
> *         UNSUBSCRIBE INFRARED                       *
> *       to                                           *
> *         MAJORDOMO@xxxxx                            *
> *----------------------------------------------------*
> *   For the IR-FAQ, IR-Gallery and heaps of links:   *
> *  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
> ******************************************************
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************

------------------------------