Re:

[Jaap Los <imagefotografie@xxxxxx>]

George Curtis wrote:
> 
> To all using 87c filtes MBFR.
> 
> Ok, so I am finally ready to mount an 87c filter between the film rails.  I
> was given some very thin mounting tape used at my local film house, for who
> knows what.  I'm a bit concerned however, considering the tape appears to be
> an aluminum backed tape.  Do I need to be concerned about light reflecting
> off the tape backing onto my film?  Any other tape suggestions?
> 
> George Curtis
> gcurtis@xxxxxxxxxxxxxxxxx
> 
George,
I use for one camera an ordinary piece of transparent office tape. For
my second camera I use a very thin brown adhesive tape, that is normally
used for taping packages etc. There can be no light reflection, because
the one end of the tape fits in the same space as the film cartridge and
the other end sits in the space between pressure plate and camera body.
I use both tapes for about a year now and never had any reflections.
Also the tapes remain at their seats and operate very well.  >
Greetings,
Jaap Los

See also my Infrared Photography Homepage specially made for you with
lots of information, infrared/lith pictures and links to other
interesting infrared-photography sites.
at:   http://home.wxs.nl/~losjb/hometest.html


*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************