RE: Bronica ETRSi 70mm film back and other 70mm stuff

["Willem-Jan Markerink" <w.j.markerink@xxxxx>]

On 24 Aug 99 at 20:23, Charles Jay Pilzer wrote:

> Can this back be adapted to use on a Hasselblad or on a Speed graphic with a
> graphloc back?

No, sorry....it might have if it had its own transport lever like the Mamiya
RB 70mm backs, but the transport on the Bronica is provided by the
camera, through gears (like most systems), so there is no way to
transport film when off the camera.

And those Mamiya RB backs have the same connection as a Graflock
2x3" system (even though these are much more rare than 4x5"
Graflock), so if you find a 2x3 -> 4x5 adapter, such an RB back will
bolt right in....but you will have to fiddle a bit with its
safety-pins, preventing both double-exposure and idle-exposure.



--                 
Bye,

Willem-Jan Markerink


      The desire to understand 
is sometimes far less intelligent than
     the inability to understand


<w.j.markerink@xxxxx>
[note: 'a-one' & 'en-el'!]
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************