Re: Roundshot 220 VR takeup spool problems

[kathjeff@xxxxxxxxxxx]

Jesse
Are you using the entire roll.???  or just part of the roll.  Seems to me Peter
Lorber told me I must use the roll to the end or at least 75% or more before I
rewind.  Mine is the 35mm modified to use non perf, so that there is 1.24 inch
image width.  I have also eliminated one of the rubber pulleys, and it works
fine.
     Jeff Weisenburger

Jesse Goff wrote:

> My Roundshot jams the film about 1 out of every 4 or 5 rolls.  It appears
> that the takeup spool doesn't take up the film fast enough or something and
> the film sometimes contiunues past the takeup spool and gets sucked into
> the film spool on the other side and starts to go around the drum again.
> It is a real mess!  It pretty much ruins the roll.  Anyone have any advice
> for me?...
>
> Also the function called "Wind To End" never seems to work.  If I am
> finished with a roll and all there is left is the paper and I need wind it
> up the rest of the way I press Wind To End and nothing happens.  I usually
> just keep pressing the Set New Film button until I hear it spinning inside.
> Does anyone know the correct way for this to work or do they have a similar
> problem??
>
> Thanks,
> Jesse
>
>         |        J e s s e    G o f f     P h o t o g r a p h y
>         |        1 0 9     M i n n a    S t r e e t     # 4 2 8
>         |        S a n   F r a n c i s c o,   C A    9 4 1 0 5
>         |        w   w   w . g  o  f  f  p  h  o  t  o . c  o  m
>         |        s t u d i o :   4  1  5    7  7  7    3  7  0  0