Re: Kodak 5" CIRKUT FILM

[Robert Erickson <cirkut8@xxxxxxxxx>]

For film for a #5 inch Cirkut or AltaVista simply saw
a 10 inch Cirkut roll in half. Finish off the spool
end with a washer the same diameter of the film and
half a 120/220 spool glued into the hallow center. The
too wide, stock flange end is easy to trim with just a
pair of scissors. ;-)

Bob

--- "Robert J. Lang or Hope Conley Lang"
<bobhope@xxxxxxxxxxxxxxxx> wrote:
> I made some 5" spools from 8" and 10" spools by
> cutting them and then
> joining them back together with a wooden dowel in
> the center.  you have to
> cut the flanges down on a lathe so they fit in the #
> 5 camera.  These
> spools and the film also fit my # 5 Al Vista.  Ron
> may have been talking
> about color film but I do it on 10" Verichrome.
> 
> Bob
> 
> At 05:24 AM 1/24/00 -0800, you wrote:
> >So, having cut it - in daylight? - you don't put
> >anything over the exposed end and all you get is
> about
> >1/8" flared? Wow. 
> 
> 

=====
Robert Erickson, cirkut8@xxxxxxxxx
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com