My first stereocards

[P3D Brian Reynolds <reynolds@xxxxxxxxx>]

Well after reading all the threads about stereo windows I finally just
started cutting up my contact sheets and mounting them on matt board.
At some point you just have to try things out and see what happens.
:)  You can see the results at
<URL:http://www.panix.com/~reynolds/photography/stereo>

These images were taken with my twinbar Lubitel setup and mounted so
that the infinity separation matched the 70mm lens separation of the
cardboard foldup print viewer I got from American Science and Surplus.
<URL:http://www.sciplus.com>  I believe the twinbar is introducing
some inadvertant convergence, so I'm working on using some telescoping
square brass tubing on the backs of the cameras to keep them
parallel.  I also have to work on figuring out a correction factor so
that the exposures of the two cameras match a bit better.

I've pretty much decided that in the future I'll use this setup for
slides (used with a viewer for the Rocky Mountain Memories 6x6 slide
mounts), and that I'll switch to large format contacts (either 4x5
pairs, or both images on a single 5x7 sheet) for Holmes stereocard
prints.

-- 
Brian Reynolds                  | "Humans explore the Universe with five
reynolds@xxxxxxxxx              |   senses and call the adventure science."
http://www.panix.com/~reynolds/ | - Edwin P. Hubble


------------------------------

End of PHOTO-3D Digest 2146
***************************
***************************
 Trouble? Send e-mail to 
 wier@xxxxxxxxxxxxxxx 
 To unsubscribe select one of the following,
 place it in the BODY of a message and send it to:
 listserv@xxxxxxxxxxxxxxx 
   unsubscribe photo-3d
   unsubscribe sell-3d
   unsubscribe mc68hc11
   unsubscribe overland-trails
   unsubscribe icom
 ***************************