3D Magic questions (was Re: PHOTO-3D digest 2387)

[P3D Brian Reynolds <reynolds@xxxxxxxxx>]

Since my original reply seens to have disappeared (perhaps part of the
switch over) I'm resending this.

Tony Shapps wrote:
> 
> Hi friends,
> 
> Ref: "3D MAGIC" one trip camera....they don't like to call it
> 'disposable' anymore since they recycle most of it.
> 
> Aperture is f/11
> focal length is 27mm using three aspherical lenses.
> Shutter speed is approx 125th sec.
> 
> Current models are loaded with AGFA 400 ASA film, earlier models
> used SCOTCH 400 ASA.
> 
> 
> Any questions?
> 

Yes.  As I sit here looking at the Marvin the Martin 3D Magic Plus
sitting on my desk it appears that the camera has a plastic body with
a cardboard wrapper.  It seems a shame to send the camera back and
have to buy another one to take any more pictures.  Except for the
fact that it is probably very profitable (since the camera will most
likely be resold) I can't see why 3D Image Tech doesn't just sell the
3D Magic as a low cost reuseable camera.  Of course it might cut into
sales of their 3D Wizard cameras.

Has anyone opened one of these cameras?  Does the film wind into the
cassette, or does the film have to be unloaded in the dark and rewound
into the cassette?  Has anyone gotten a local photo processor to
develop the film from one of these cameras and return the camera with
the negatives?

-- 
Brian Reynolds     | "Knowledge, Sir, should be free to all!"
reynolds@xxxxxxxxx |  -- Harcourt Fenton Mudd
NAR# 54438         |     "I, Mudd"


------------------------------

End of PHOTO-3D Digest 2389
***************************
***************************
 Trouble? Send e-mail to 
 wier@xxxxxxxxxxxxxxxxxxxxxxxx 
 To unsubscribe select one of the following,
 place it in the BODY of a message and send it to:
 listserv@xxxxxxxxxxxxxxxxxxxxxxxx 
   unsubscribe photo-3d
   unsubscribe sell-3d
   unsubscribe overland-trails
   unsubscribe icom
 ***************************