Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D
|
|
Notice |
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
|
|
P3D Brass, again, for antique viewers
- From: Bob Wier <wier@xxxxxxxxxxxxxxxxx>
- Subject: P3D Brass, again, for antique viewers
- Date: Sun, 1 Feb 1998 21:01:47 -0600
Here's something from another list I'm on - this is rather
surprising as the first item is the same as the formula to CAUSE
tarnish on new brass parts, which was verified here as being effective.
I guess it all depends on whether the part is immersed or suspended
above in the vapor (!).
--BW
Bob Wier
mailto:wier@xxxxxxxxxxxxxxxxx
09:00 PM Sunday, February 1, 1998
Rocky Mountain College, Billings MT.
keeper of the Photo-3d and Overland-Trails
mailing lists and the USA GPS Waypoint server
=== begin forwarded text
From "The Weekend Refinisher" by Bruce Johnson:
Brass Cleaner (for dirt and mild tarnish)
1 part water
1 part household ammonia
combine ingredients is a glass container. Insert item, let soak, then
remove and rub with cloth and clean. Seal with paste wax or lacquer.
Brass Cleaner (for tarnish)
vinegar
salt
Soak item and vinegar. Moisten rag with vinegar, dip in salt and rub
item. Rinse with vinegar. Dry immediately. Seal with past wax or
lacquer.
Brass Cleaner (for tarnish)
lemon slice
salt
Dip a slice of lemon insalt, then rub item. Rinse with vinegar, dry
immediately, then seal with paste wax or lacquer.
Brass Cleaner (for tarnish)
2 parts vinegar
1 part lemon juice
Combine ingredients, then insert item and let soak unitl tarnish is
loosened. Remove and rub dry with cloth. Seal with paste wax or
lacquer.
-----------
I tried the first and second formulae. The second was a pain in the neck
and didn't seem very effective. The first was pretty effective. I used
it on a brass chandelier that was almost black. I disassembled and let
all parts soak a good while (be sure to completely immerse the item).
Things looked a lot better coming out of the solution, but still required
one go around with Brasso. I'd probably still be polishing if I had only
used Brasso.
Johnson has a section of various formulae (including those above)
prefaced with a warning to test on an inconspicuous spot, use appropriate
ventilation, wear appropriate safety gear, etc.
Thanks,
Bill Coulter
==end forwarded text
------------------------------
|