P3D Re: Labels

[revchas@xxxxxxxx (Charlie Hotchkiss)]

On Thu, 9 Jul 1998 08:03:42 -0600 roberts@xxxxxxxxxxxxxxxxx (John W
Roberts) writes:
>
>>Date: Thu, 9 Jul 1998 07:46:01 -0600
>>From: "ron labbe" <ron@xxxxxxxxxxxx>
>>Subject: P3D Labels
>
>>Actually, I've found it easy to just print a portion of the page, 
>later if
>>you want to print another partial page just set up labels to print in 
>the
>>areas where there are still labels left.
>
>I've always worried that repeated passes through, the corners of the
>individual labels might start to curl up, then a label might strip 
>itself
>off of the waxed paper and deposit itself somewhere along the paper 
>path
>inside the printer (or get tangled up in the moving parts).
>
>Has anyone ever had that happen with an Avery label (after repeated 
>passes
>of the same label sheet, with some of the labels removed)?
>
>I would also be slightly concerned if the person printing the labels
>forgets to relocate one, and the printer tries to print a label onto
>the bare waxed paper. Would that result in toner/ink falling off and
>floating around somewhere in the printer, to smear other pages?
>
>John R
>[who would be happy if the answer to both questions is "no problem",
>but who thought it would be worth asking]
>
Be happy
Ink jet printers are no problem and if the pages cool between runs we've
never had a problem with any of our lasers on either count.

Charlie H.

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]


------------------------------