Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D

Notice
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
<-- Date Index --> <-- Thread Index --> [Author Index]

P3D Heat Study part 5 of 7 (Results)

  • From: Tom Hubin <thubin@xxxxxxxxx>
  • Subject: P3D Heat Study part 5 of 7 (Results)
  • Date: Mon, 22 Feb 1999 17:18:17 -0800
Hello,

Here is part 5 of 7.

Tom Hubin
thubin@xxxxxxxxx
AO Systems Design

***********************************************************

        Results

        All heat tests, except the Brackett Dissolver, were done using 
        the left channel of the hot projector (PSSP projector #1) with a 
        500 watt CZX lamp. The 3mm thick filters were tested alone then 
        stacked in pairs for an equivalent of 6mm thickness. The results 
        are listed in the table below. 

                    Filter             Film Temperature

                Single 3mm blue            over 180F
                Single 3mm green                164F
                Double 3mm (6mm) blue           163F
                Double 3mm (6mm) green          120F
                Kodak 5.9mm green               105F
                Brackett Dissolver              105F


------------------------------