P3D 3d fireworks!

[John Baird <jbaird@xxxxxxxxx>]

hi dave!  read your great post in p3d!!  i did fireworks too but havn't
got my slides back yet!!   (kr64)!!! :-(

last year i did the same as you!  had to re-adjust quickly and set one
camera too high!!  i used a bar that was a wood 2x2 with two angle irons
screwed on both ends to = 10ft! the bar attached to the tripods and the
cameras on the ends of the angle iron allowed some twist!!!  

so this year i took a angle measuring level to set both cameras to the
exact same height!!  i had to use 45 degrees because i was 300 to 400'
from where they set them off!!   when i heard that you were getting good
3d at three blocks i was just thrilled!!  hope i didn't go too hyper!!!
i was estimated no more than 500 t0 600' from the bursts!  filled the
frame at 50mm!! the one thing that worries me tho is i was using f8.5
with kr64! eeek! i hope not underexposed!!!! :-(  (crossing my fingers!)

see my rig at kc3d club meeting!  hope my kodachrome is back by then!!!!

i love you buddy and i'm glad to have you in our group!!

see'ya laiDDDer!!   janni bearDDD!!


------------------------------