Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D
|
|
Notice |
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
|
|
[photo-3d] Re: 3D Camera Synchronisation
- From: "Robert Brand" <rb@xxxxxxxxxx>
- Subject: [photo-3d] Re: 3D Camera Synchronisation
- Date: Thu, 22 Mar 2001 20:31:41 +1100
Boris, you asked about my twin rig Ricohs and the method of wiring the sync.
I bought a pair of KR10M cameras about 8 years ago and doctored them up. I
did choose them using a method to ensure good initial sync. I will be
writing a detailed article for the Sydney Stereo Camera Club magazine
shortly, but there was a fairly detailed article I wrote some years ago. I
will scan the old magazine in the next few weeks and put it in the archives
on the sscc web site. I will post a note here for those that are interested.
The new article will be available for members, but maybe reprinted in other
club magazines at a later date.
You also said: "This would also permit much more reliable performance with
flash
synchronization in the studio (where you actually want the cameras to be
non-perfectly synched, with the flash signal coming off the slower camera).
Please let us know the circuitry needed to effect a delay feature. For
flash synch I am looking for a camera delay of around 1/100 sec."
The design is in my head at the moment, but it will not take much to turn it
into reality. I plan to use 4 thumb wheel switches to allow delay in one
second intivals. I will use an accurate 1kHz oscillator to derive a 1m sec
pulse and use the thumb wheel settings to dial up the number of pulses I
need before firing the second camera. Thus I will have 1m sec - 10 sec in 1m
sec intervals.
This will also allow those interested in spacial effects to have accurate
control over the timing between shutters. If I build in an adjustable
offset, it can be used to set the cameras to fire accurately together if one
camera is normally a bit slower than the other (with the adjustable delay
set at all zeros) The offset will be a simple binary DIP switch inside the
unit and once set should not need to be adjusted. It will run off the camera
batteries. A preset could be included for flash work to delay the fastest
camera, but if the sync is accurate, this should not be necessary. It could
be used for a variety of cameras.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
|