Re: [photo-3d] slide scanner

[Ron Beck <rbeck@xxxxxxxx>]

I would have a problem with this for two reasons.  First, a lot of the
slides I'd like to scan are 40+ years old and I don't want to remove the
film chips.  Second, of the new slides I have, I use heat seal mounts
and sealed them "very well" so that removing the film chip completely
destroyes the mount and could potentially damage the film chip.

So, I'll stick to a scanner that I can use the mounts "as is".

Regards,
Ron

Ralph Johnston/Linda Sherman wrote:
> 
> You remove the film chip from the stereo mount.  Then you choose between
> two methods:
> 
> 1.     If it is an 8 perf image, you can slip it back into the plastic 2x2
> and scan that
> 2.     Otherwise, you place it on the glass and tape it down with westabs.
> It must be EXACTLY level
> 
> Then you remount in the stereo mount.  Sorry, I know of no better method. I
> do this all the time and it doesn't take that long. -Ralph

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/