[photo-3d] What size is your club's screen?

[gccampos@xxxxxxxx]

Well,

I went to the Hardware store and found that I could easily make a PVC 
screen frame for a very resonable price!

The next question is what aspect ration should I use?  I've been 
assuming I should have at least a 1:1.4 ration for full frame RBT, if 
not a 1:1.5 for 2x2 projection.  I notice though that so many other 
screens are square.  Is that because of the Realist Format of 23 x 24?

I have several configurations that have occured to me (assuming a
1.5" loss at each border for reinforcement and grommets):

A.  Six 63" x 73" screens

B.  Two 74" x 111" screens across the top and three 52" x 73" screens 
    across the bottom (no waste)

C.  Four 63" x 88.5" screens and two 42" x 63" screens (if not        
    directional material) or Four 63" x 94+" screens if it is.

D.  Two 63" x 94" screens on the left side, one 85" X 128" screen in  
    the upper right corner and two 41" x 62.5" screens below that.

E.  Two 63" x 63" screens on the left, and four 63" x 78"  screens.

I would love to have a huge screen in case I do shows in larger 
buildings, but I wonder if my TDC 116 would be bright enough.  
My club wouldn't couldn't use anything much taller than 60" (we have 
low hanging lights. 

Grant


 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/