[photo-3d] Camera Coupling

[Peter Homer <P.J.Homer@xxxxxxxxxxxxx>]

Tony Russel wrote

>A pair of Minolta XG-1's and a pair of Olympus Trip 35s, both pairs 
>are mounted on bars which have been machined to fit.
>The Minolta's are coupled electronically, but the Trips have to have 
>a double cable release.
>Is there any other way of coupling them that anyone knows??
>I found that by grinding down the lugs that were intended for the 
>neck straps, I could get the Trips closer together by nearly 10mm 
>and that does seem to have had a marked effect on the results.
>The Minolta's are slightly offset on the bar to get the same result.

I have been trying pairing a couple of Olympus Trip 35s on a bar but I overlap the lugs which must produce a slight "Toe in" on one of them and put a nut and bolt through to hold them together. I use an Olypus double cable release originaly intended for macro bellows but it is adjuustable on one cable, but it is not very consistent on firing both shutters let alone at the same time especialy if the cable is not kept straight.  P.J.Homer  



 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/