T3D Re: Lenticular Prints

[Peter Homer <P.J.Homer@xxxxxxxxxxxxx>]

>Hi,
>
>Dr G wrote:-
>
>>The Nimslo prints have lenticules .005 in wide. There are 4 stripes
>>(.001 in wide) under each lenticule, one from each lens.
>
>Am I right in thinking that implies a 0.001 in unexposed strip?
>Presumably that would be under the joint between the lenticules.  If it's
>not just a rounding error then it would make a useful alignment guide.
>When the white strip disappears the lenticular layer is positioned
>correctly.  :-)
>
>Dave Spacey

 Actualy I believe I read somewhere that the Nimslo prints had a total of
16 stripes under each lenticule because each of the 4 images was printed 4
times with movement in the enlarger between exposures . But that does not
agree with the stripes being .001 in wide and the lenticules .005 in wide.
P.J.Homer




------------------------------