Re: [tech-3d] Kodak Stereo Camera

[Rod Sage <rsage@xxxxxxxxxxxxxxxxxxxx>]

I am pretty sure there is a problem with your camera. I had a similar problem. I cured it by removing the bottom cover and putting a little WD40 on a pin or lever on the right side bottom. The old grease had gummed up. There are no hazards removing the bottom. Watch how the mechanism works. Wiggle all the levers to see that they move easily. The knob should wide on until the film sprockets
pull the center cog around. It trips a lever which stops the wind knob. After the shutter is tripped the knob can wind again. Good luck.
Rod

Sy/Harriet wrote:

> I wanted to use my Kodak Stereo Camera for the first time. I did not have an instruction manual but looking at the camera I thought that it would be simple enough to use. I ran into a problem immediately. After loading the film I closed the back and started winding the film to the first exposure. It never clicked or stopped. Am I doing something wrong or is the camera in need of repair?
> Sy Goldberg
> syhar@xxxxxxxx
> ........................................................
> iWon.com       http://www.iwon.com     why wouldn't you?
> ........................................................
>
> ------------------------------------------------------------------------
> Get paid for the stuff you know!
> Get answers for the stuff you don’t. And get $10 to spend on the site!
> http://click.egroups.com/1/2200/6/_/520353/_/958357719/
> ------------------------------------------------------------------------




------------------------------------------------------------------------
Get paid for the stuff you know!
Get answers for the stuff you don’t. And get $10 to spend on the site!
http://click.egroups.com/1/2200/6/_/520353/_/958362826/
------------------------------------------------------------------------