Plus density / jobo v. hand processing

[Greg Pease <gpp@xxxxxxxxx>]

So the last test I did solved all of my problems!  Many thanks to all 
that helped lead me to the solution!  I abandoned hand processing.  With 
this method I was getting heavy plus density on the top and bottom edges 
of the image area (near the sprocket holes), and funny Mold-looking holes 
or minus density spots.  I then went to JOBO processing which eliminated 
the "mold", but gave banding of uneven development running the length of 
the film, and still a bit of plus density.  Now I have it!  Dip & Dunk!  
I found a lab that has a dip & dunk processor.  The film has very even 
development, no plus density (most likely caused by agitation in tank 
development),and no "mold" (caused by air bubbles).  Yipee!  One thing 
though, this lab uses T-Max developer.  I have no experience with it.  
All of the other labs I go to use D-76.  Does anyone have oppinions on 
T-max developer for HIE?
Thanks Again,
Greg Pease

- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

                     Greg Pease & Associates, Inc.
                         23 East 22nd. Street
                     Baltimore, Maryland 21218 USA
                  phone 410-662-4994 fax 410-662-1797
            greg@xxxxxxxxxxxxxxxxxx  www.gregpeasephoto.com


*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************

------------------------------