Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D

Notice
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
<-- Date Index --> <-- Thread Index --> [Author Index]

Re[2]: stripes on HIE with Bronica



     I was about to ask the list if anyone had used a Mamiya 6MF with HIE 
     and you obviously have. I have only just started using HIE in a Contax 
     RX with a smooth pressure plate and had very good results using D76. 
     However, I was thinking of investing in the 35mm attachment for the 
     Mamiya to get some wide negatives but stopped after examining the 
     pressure plate which is dimpled.
     
     Do I assume from this that you now successfully use HIE in the Mamiya?
     
     Does anyone else have any positive/negative feedback on this setup?
     
     Many thanks in advance,
     
     Alan Bradford.


______________________________ Reply Separator _________________________________
Subject: Re: stripes on HIE with Bronica 
Author:  "Elton N. Kaufmann - Cycloid Fathom Group" <cycloid@xxxxxxxxxxxxxxxxxx>
at CCGATE
Date:    17/6/1998 12:11 AM


I also saw the sprocket-related stripes and the list advised me to cut back 
on the agitation.  That seemed to have worked.  I, like you, saw this 
effect on the 35mm HIE exposed in a Mamiya 6MF.  I do not recall seeing it 
when exposed in my Nikon 8008s.  If it's agitation, shouldn't we see it 
regardless of the camera used?
                                                                EltonK
     
     
>Date: Tue, 16 Jun 1998 16:12:17 -0500
>From: Nate Keith <nkeith@xxxxxxxxxxxxxxxxxxxxxx> 
>Subject: Re: sripes on HIE with Bronica
>
>Are you sure it is not an issue of agitation during development?  I ran 
into the
>same problem with my new Mamiya back and immediately blamed the back (since I 
>had never had the problem before with my Nikon).  However, after posting
to the
>group, someone mentioned that it may be a result of circulation around the 
>sprocket holes during development.  I started being a little more careful and 
>only invert once during 30 seconds now (after the initial 30 seconds) and 
have
>not had the problem return.
>
>Nate
>
     
Exhibiting fine-art and editorial photography 
Cycloid Fathom Gallery
Elton N. Kaufmann, Chairman
P. O. Box 8129
Downers Grove, Illinois 60517-8129
USA
cycloid@xxxxxxxxxxxxxxxxxx
http://www.cycloid-fathom.com/
ftp.cycloid-fathom.com/group/uploads/ 
*
****
*******
****************************************************** 
*  To remove yourself from this list, send:          * 
*         UNSUBSCRIBE INFRARED                       * 
*       to                                           * 
*         MAJORDOMO@xxxxx                            * 
*----------------------------------------------------* 
*   For the IR-FAQ, IR-Gallery and heaps of links:   * 
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  * 
******************************************************
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************

------------------------------

End of Infrared-Digest V0 #616
******************************