Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D
|
|
| Notice |
|
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
|
|
Re: HIE processing, added density, turbulence and more..
- From: Frank Schiffel <SchifF@xxxxxxxxxxxxxxxxxxxxxxx>
- Subject: Re: HIE processing, added density, turbulence and more..
- Date: Wed, 16 Dec 1998 09:24:32 -0600
invert it 2-3 times then tap it on a hard surface to remove bubbles. sprocket patterns are an indicator of inadequate agitation. also check to make sure your developer is thoroughly mixed, especially if you're doing say D76 at 1:1 or 1:3 from a stock solution.
>>> Cor Breukel <cor@xxxxxxxxxxxxxxxxxxxxxxxxxxx> 12/16/98 7:46:48 AM >>>
An recurring problem I encounter (next to "emulsion artefacts"), is added
density around the sprocket holes (black on the negative, white in print).
Presumably due to the turbulence around these holes during development.
Changing my manual rotation method (only a gentil 90 deg tilt, with a
slight rotation every 30 sec), helped quite a bit, but didn't completly
solve it. Lately I aquired a second hand JOBO processor, a treat! So I
decided to use it also for HIE. This time no "sprocet-hole pattern", but a
slight added density all over the whole film strip, of about 1mm
thickness, bottom and top of the (horizontal) frame. Still no solution,
still turbulence I assume, and with some darkroom effort removable. I
could lower the rotation speed next time.
Any thougths, experiences, feedback etc on this ?
Thanks,
Cor Breukel
http://ruly70.medfac.leidenuniv.nl/~cor/cor.html
"The Infrared Gallery"
http://ruly70.medfac.leidenuniv.nl/~cor/ir-gallery.html
*
****
*******
******************************************************
* To remove yourself from this list, send: *
* UNSUBSCRIBE INFRARED *
* to *
* MAJORDOMO@xxxxx *
*----------------------------------------------------*
* For the IR-FAQ, IR-Gallery and heaps of links: *
* http://www.a1.nl/phomepag/markerink/mainpage.htm *
******************************************************
!
!
!
!
!
*
****
*******
******************************************************
* To remove yourself from this list, send: *
* UNSUBSCRIBE INFRARED *
* to *
* MAJORDOMO@xxxxx *
*----------------------------------------------------*
* For the IR-FAQ, IR-Gallery and heaps of links: *
* http://www.a1.nl/phomepag/markerink/mainpage.htm *
******************************************************
|