RE: RE: Pinholes in film base.

["Charles Jay Pilzer" <cjp@xxxxxxxxxx>]

The time that I got the dense band of small clear spots on the 35 mm HIE the
film was developed in 72 degree solution, fixed in a non-hardening fixer,
and washed in 80 degree water.  The 80 degrees was the lowest I could get
here during the summer.

The idea of reticulation did not occur to me since it was not the whole
negative.  It occurred to a strip along the roll that was about 1/3 the
width of the negative.

My darkroom is air-conditioned to about 70 degrees.  I have modified the
water supply by running it through 150 foot of garden hose.  The hose is
full of water at 70 degrees.  I also use Kodak Rapid Fixer with the hardener
added.

cj

*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************