Re: EOS fogging (Re: My first try)

[Mr645@xxxxxxx]

For what it's worth, I have shot many rolls of HIE on two different EOS A2 
bodies and an original EOS Elan.  Both cameras fog the sprocket area 
completly where the film sensor is, BUT I have never had an image effected by 
this fogging.  It goes right up to the edge of the image area but does not 
enter it.   I have been processing the film in regular Jobo Plastic tanks and 
there also I have no fogging problems.  

Here is a link to  a sample of what the EOS cameras will do to Kodak HIE.

http://www.jonlayephotography.com/infrared/EOSinfrared/EOSinfrared.html




<<<<<<I would be interested to hear if you have any other, much fainter 
fogging. A
friend tried out some Kodak in her EOS A2E and got the strong fogging around
the sprocket holes. But there is also some other much less obvious fogging. 
Now, this was her first experience with Kodak IR in 35mm and she had problems
loading the film for development on a plastic reel because of the much thinner
base. She left it in the plastic tank and I loaded it on a steel reel for her
a little later (I'm better with the steel myself). SO the fogging could have
occurred then.  But she is wondering if it came from the counter in the A2E. 
I have an Elan, but I have only run IR through my original Rebel and old Canon
AE-1P,which do not have the counter.>>>>>>>
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************