Re: XTOL problem... SOLVED?

[Don Roberts <droberts@xxxxxxxxxxxxx>]

Likewise.  I use inversion agitation mostly, occasionally rotation, and so have
always filled the tank and more than sufficient solution.  My success to
failure rate is about 6 bad to 1 good experience.  I am going back to D-76.

Dan Cardish wrote:

> Like I said, sometimes xtol has worked fine for me.  Other times, nada.  I
> know about the minimum stock solution requirements, and observe them.
>
> Dan C.
>
> At 07:36 PM 27-12-99 -0800, David M. Young wrote:
> [snip]
> >
> >Secondly and far more important, XTOL apparently requires enough base
> >solution to handle the amount of film, and the guideline is 200ml of
> >solution per 80 square inches of film (about 1 roll of 35mmx36 exposure, or
> >1 roll of 120).  You can increase development time by 15% up to 200ml/160
> >sq. inches, and 15% over that time will take you to 200ml/240 sq. in.
> [snip]
>
> NO ARCHIVE
>
>
>
> *
> ****
> *******
> ******************************************************
> *  To remove yourself from this list, send:          *
> *         UNSUBSCRIBE INFRARED                       *
> *       to                                           *
> *         MAJORDOMO@xxxxx                            *
> *----------------------------------------------------*
> *   For the IR-FAQ, IR-Gallery and heaps of links:   *
> *  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
> ******************************************************

--
====================================================================
      Don Roberts   *  Bittersweet Productions  *  Iowa City, IA
                      *                                    *
Of course, that's just my opinion.  I could be wrong. -- Dennis MIller
====================================================================


*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************