HIE No Spots

[shopper@xxxxxxxx]

Last August I noted that the dimples/holes in the pressure plate of 
my Bronica EC did not cause spots on the cut down HIE 220 
negatives.  There are three holes about 5mm across going up the 
middle of the plate.  They appear to be about 1 or 1 1/2 mm deep 
and are for accessing screws.  Someone suggested that I should 
try shooting an 18% gray card and looking for spots.  I finally got 
around to trying that and found no spots/reflections on the images 
of the card or anywhere else on the roll.[I shot at about 15cm 
distance with a 50mm Nikkor-H at f3.5 and 5.6]  I have no idea why 
dimples on the pressure plate of 35mm cameras cause problems 
but not on 6x6s--at least mine.  I rate the film at ASA 125 on a 
hand held meter and shoot through a #25 red filter.  The film is 
presoaked and developed in HC110 dil b by the book--HC110 
because I have a large supply and it works.  


Jim
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************