(Fwd) Unrouteable Mail for panorama-1@xxxxxxxxxxxxxxxxx

[postmaster@xxxxxxxxxxxxxxxxx]

Note the address should be "panorama dash ell (as in the letter 
between k and m)" NOT "panorama dash one"


------- Forwarded Message Follows -------
Date:          Fri, 17 Dec 1999 02:20:10 +1100
From:          "Name Router 4.1" <postmaster@xxxxxxxxxxxxxxxx>
Subject:       Unrouteable Mail for  panorama-1@xxxxxxxxxxxxxxxxx
To:            raffa@xxxxxxxxxxxxxx


--Boundary_(ID_MEMdfSFJ4o8HTjBzQJmofQ)
Content-type: Text/Plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Cannot route mail to the following:
 
panorama-1@xxxxxxxxxxxxxxxxx  (No Route found)

--Boundary_(ID_MEMdfSFJ4o8HTjBzQJmofQ)
Content-type: Text/Plain; Charset=ISO-8859-1
Content-transfer-encoding: 7BIT

To use the Name Router to guess the Email address of a *Staff* member,
send to  First.Lastname@xxxxxxxxxxxxxxxxxxx
     or  First.Middle.Lastname@xxxxxxxxxxxxxxxxxxx
The Lastname field in the e-mail address *must* be supplied, and must
  match the person's last name.
The First and Middle name fields also need to match the person's name,
  but can also be abbreviated or omitted as long as the resulting email
  address is not ambiguous.
The list of supported Group fields is currently
  Adm, ArtDes, Arts, BusEco, CeLTS, Education, Eng, Gadm, General,
  InfoTech, ITS, Law, Lib, Med, Nursing, Sci, and VCP
The Group field can be omitted to search all these Staff groups.

To send Email to a *Student* send to <usercode>@student.monash.edu.au

Or you can use the Findemail service to send a message to someone:
  http://www.monash.edu.au/cc/services/email/findemail.html

To send Email to a someone not registered with the Name Router, you have
to send to their full  usercode@xxxxxxxxxxxxxxxxxxxxxxx  mailbox address.

Note. This site does not want or condone unsolicited junk or chain email.

This was an automated message from the Mail System.
Please report problems to  helpdesk@xxxxxxxxxxxxx

Returned message follows

--Boundary_(ID_MEMdfSFJ4o8HTjBzQJmofQ)
Content-type: MESSAGE/RFC822

Received: from darius.concentric.net ([207.155.198.79])
 by vaxc.cc.monash.edu.au (PMDF V5.2-31 #29714)
 with ESMTP id <01JJLBEJ8W4W95NC4M@xxxxxxxxxxxxxxxxxxxxx> for
 panorama-1@xxxxxxxxxxxxxxxxx; Fri, 17 Dec 1999 02:20:07 +1100
Received: from newman.concentric.net (newman.concentric.net [207.155.198.71])
 by darius.concentric.net (8.9.1a/(98/12/15 5.12))	id KAA09860; Thu,
 16 Dec 1999 10:20:02 -0500 (EST)
Received: from pavilion (ts031d10.sjc-ca.concentric.net [206.173.231.22])
 by newman.concentric.net (8.9.1a)	id KAA29280; Thu,
 16 Dec 1999 10:20:01 -0500 (EST)
Date: Thu, 16 Dec 1999 07:20:16 -0800
From: Ray Raffa <raffa@xxxxxxxxxxxxxx>
Subject: Panorama adaptor for 4X5
To: panorama-1@xxxxxxxxxxxxxxxxx
Errors-to: raffa@xxxxxxxxxxxxxx
Message-id: <38590330.4A98@xxxxxxxxxxxxxx>
MIME-version: 1.0
X-Mailer: Mozilla 3.0Gold (Win95; U)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT

Recently I have been using a modified 4X5 dark slide which I had
machined to produce two 2x5 exposures on one sheet of film. 

The nice thing about it is I can usually print them together on one
sheet of 16x20 paper giving me two 4x20 prints. If anyone is interested
in this method I will be having some more slides machined soon.

Ray Raffa
Sintec Photographic

--Boundary_(ID_MEMdfSFJ4o8HTjBzQJmofQ)--
Science Faculty Postmaster
Monash University
Clayton Vic 3800