Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D

Notice
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
<-- Date Index --> <-- Thread Index --> [Author Index]

Re: expo2: 6x6 transparencies


  • From: P3D Joel Alpers <joel.alpers@xxxxxxxxxxx>
  • Subject: Re: expo2: 6x6 transparencies
  • Date: Fri, 14 Jun 1996 11:10:46 -0600

<sorry for the long lag in replying! I've been catching up on digests!>

Elliott wrote:
 
> There are some technically stunning 6x6 slides in giant paired mounts
> (does anyone know a source for side by side 6x6 and 6x4.5 mounts?) 

Steve Spicer (Australia) and I sell those - free samples to anyone
interested!


> taken by Don Lopp, Joel Alpers, and Greg Erker. The most interesting is 
> Joel's slide Calypso Cascades, shot with a Sputnik and on Ilford FP4 and 
> contact printed on Kodak Technical Pan film. This was apparently Joel's first
> attempt at a B/W positive in this format, and it worked very well.  The
> image has a luminous quality. The 63mm stereo base of the Sputnik gives
> it some real potential for working fairly close.
<snip>
> (Joel, could you supply more info on the Ilford FP4/Tech Pan process? Looks
> like an enlarger is not necessary. Which is good, because I don't have one.)
 
I got this idea from rec.photo.darkroom some time ago. Basically, it uses
the fact that Tech Pan has a steep contrast curve very similar to normal
printing paper, when you develop it in Dektol.

Two side-by-side Sputnik images -just- fit on a 4x5" sheet of Tech Pan.
I did a first exposure as a test strip, doing 4-5 bands of 5-sec exposure
each. From that I was able to pick an exposure I liked.

Develop in Dektol about 2 minutes (as in printing papers, the time is not
very critical), stop and fix as usual.

This week someone on r.p.darkroom described doing the same thing with
"Arista litho film" from Freestyle Sales, Inc. - they said they were able
to successfully alter contrast by using different dilutions of developer.

Of course, this isn't limited to 4x5 sheets; but 4x5 is really convenient,
as you can tray process it in the same session as doing other printing. But
you could also use the technique with a slide copier for duping 35mm negatives
into positives for Realist format, for example.

Any more specific questions, please let me know!

Joel.


------------------------------