P3D Re: RE: Stereo Processing & Mounting, Realist format

[wduggan3d@xxxxxxxx (WILLIAM A DUGGAN)]

Boris Starosta in the latest P3D asks about processing
 and mounting realist format.

DUGGAN REPLYS:

The only thing CONSTANT about STEREO PROCESSING and
 MOUNTING is CONSTANT CHANGE:

RE:  Recent questions and discussion in PHOTO-3DD about 
stereo mounting for Stereo Realist format Kodachrome and E-6 film:

I have a letter, dated January 1998, from Michaele Spagnola,
Customer Relations Specialist, Qualex, Inc., Fair Lawn, NJ 07410, 
Telephone 1-800-345-6973 Ext. 428, which states in part:

"...due to a recent organizational change, the equipment used in 
providing the stereo-mounting service in our Dallas lab has been 
dismanteled and shipped to this location  (Fair Lawn, NJ), where 
all mailer orders are now being handled.  The machinery is now 
being installed and will shortly be operational.....

Include (inside each PK-36 mailer for 36 exposure film and also in
each PK-20 or PK-24 mailer for each 24 exposure roll) a check for 
$4.20 made out to 'KODAK PREMIUM PROCESSING' as the
additional payment for stereo-mounting.....

Many thanks for your patience and please direct any questions or 
correspondence to my personal attention.  Michaele Spagnola"

Although not mentioned in the letter, it is essential that you print 
clearly inside the "SPECIAL INSTRUCTIONS" box on the mailer:
STEREO PROCESSING AND MOUNTING.  Please note that this 
service is only for film exposed in STEREO-REALIST format 
cameras.  You may purchase PK-36 mailers for as low as $4.29 each 
from NY mail order firms.  If you send your film in through any camera 
store, you must use the term "STEREO PROCESSING AND MOUNTING", 
NOT "3-D Mounting", and explain to the clerk that the order must be sent
 to P. O. Box 7000, Fair Lawn, NJ 07410-7000.

You will receive cardboard stereo slides suitable for hand viewing, but
not for projection.  You must remount all slides you want to project to
create the stereo window, set the separation of homologous infinity 
points, and  vertically align all homologous points.  I recommend 
either RBT Realist (5 perf) mounts purchased from Jon Golden 
(E-Mail:  3dman@xxxxxxxxxxx) or 2 x 2 GEPPE 6301 (24 x 24mm) 
combined with GEPPE 6801 (21 x 28mm) vertically oriented to create
a 21 x 24mm opening -- the closest match to standard Realist-format --  
purchased from Reel 3-D Enterprises, Inc., P.O.Box 2368, Culver City,
 CA 90231, Phone 1-310-837-2368, FAX  1-310- 558-1653.  Ask for a 
free catalog.

For other than Realist format images, such as split-frame, European 
Format, half-frame, etc., I recommend sending to any lab that will
process
Kodachrome or E-6 with clear "DO NOT MOUNT" instructions, in which
case you must mount them yourself.    Hope this helps,

William A. ( Bill)   DUGGAN, APSA
wduggan3d@xxxxxxxx

Go to:    http://www.GWCCC.org  and click on  PSSP  for information
 about Potomac Society of Stereo Photographers (PSSP) meetings.

Go to:  http://members.tripod.com/~g_cowardin/nsa/index.htm
for information on the NSA'98 Richmond Convention, August 6-10.   

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]


------------------------------