P3D 2x2x2 slide viewers

[Michael Watters <mwatters@xxxxxxxxxxxxx>]

Just wanted to thank everyone for the various comments and suggestions.  After
giving it some thought I'm gonna try one of two things:

I've got a matched pair of loupe's that I might use for constructing a viewer from 

scratch.  I remember seeing some plans for such a couple years ago and probably
saved a copy.  If not, it shouldn't be too hard to come up with though.  Radio Shack
project box and a few tidbits from here and there.  The loupe's are focussing so I don't
have to hack a focus into the thing.  Just an interoccular if I feel like it.  It's mainly just
the slide holder and illumination that needs to be done.

I've also got an idea for converting my Realist Red-button to handle both 41x101 and
twin 2x2 with only minimal modification of the viewer itself.  Did a quick test of the idea
over the weekend and I think it'll fly.  Chops off the extreme edges of the slide a little
bit, but should be acceptable.  I'll post my results if/when I'm able to get the thing 

put together and tested out.

If I'm pleased with the viewing system, I'll likely scrap the 41x101 format completely and
work on looking for a pair of projectors for projecting.    Maybe get a box of RBTs for 

showing things at a club meeting (assuming I eventually move somewhere there's a
club again), but that'd be it.


mike
watters


------------------------------