P3D Re: HELP! Viewmaster MarkII Flash HELP!

["Dr. George A. Themelis" <DrT-3d@xxxxxxxxxxxxxxxxxxxxxxxxxxx>]

>One is marked "X" and the other is marked "M".  And there are two choices 
>on how to read the flash attachment's instructions, those being "A" for 
>automatic and a distance chart.

1. Plug the cord to "X" (this is for electronic flash - the "M" is for
   flash bulbs.

2a. Use either "A" and the suggested aperture (there must be an aperture
    assosiated with this "A"... maybe it is marked, circled, highlighted
    in the distance chart)

    OR

2b. Use the manual mode (the other choice besides "A", if there is one)
    and consult the distance chart on how to set the aperture.  For 
    example, the chart might indicate f5.6 at 10 feet for ASA 100 film.

George Themelis


------------------------------