Re: [photo-3d] heat seal vs spicer vs rbt

["David W. Kesner" <drdave@xxxxxxxxxx>]

David Motz writes:

> When I'm mounting in Spicers with an RBT jig I place the chips face
> down on the front side of the mount and place the mount and jig in my
> red button before I tape the chips down.

A much easier and faster way to do this is to modify an SV1 
viewer. Simply pry off the front white diffuser. Now when you 
have placed the chips on the RBT jig on a light box just use 
the viwer to preview and set the window. Because you flip the 
jig over on the Spicer mount they are face up on the jig so 
you don't have to view backwards and you don't have to remove 
and remount anything.

That's all for now,

David W. Kesner
Boise, Idaho, USA
drdave@xxxxxxxxxx