[photo-3d] Re: projecting 2x2

[JNorman805@xxxxxxx]

Peter Davis writes:


> Folks in my office are very interested in seeing some of the slides I shot 
> on my last couple of business trips.  I'd love to show them stereo, but 
> these are mainly 2x2 shots from a twin rig.
> 
> Any suggestions on what I would need to do a decent job of projecting 
> these, and where to rent or borrow the equipment?
> 
> 

I've used two different approaches, and each has its pros and cons: (1) 2 
Carousel projectors stacked one on top of the other with an inexpensive frame 
purchased from Reel 3-D, and (2) mounting the mounted slides side by side, 
with a cardboard spacer between them, so the total length of the mounted pair 
matches the length of a standard Realist mount, and projecting them using the 
rear channel of the slide carrier in the TDC 116 projector.  Either way, you 
have to make sure the original mounts in the 2x2s do not suffer from 
misalignment (vertical, horizonta or rotational).  Misalignment is pretty 
easy to come by in twin full frame rigs.  Since I use a twin rig consisting 
of two vertically oriented cameras, I regularly experience vertical 
misalignment and have to correct for it later, by remounting.

Jim Norman    


[Non-text portions of this message have been removed]


 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/