Mailinglist Archives:
Infrared
Panorama
Photo-3D
Tech-3D
Sell-3D
MF3D

Notice
This mailinglist archive is frozen since May 2001, i.e. it will stay online but will not be updated.
<-- Date Index --> <-- Thread Index --> [Author Index]

Re: Pin Holes In The Emulsion

  • From: Gdoces@xxxxxxx
  • Subject: Re: Pin Holes In The Emulsion
  • Date: Wed, 19 Aug 1998 01:28:21 EDT
In a message dated 8/19/98 3:07:07 AM !!!First Boot!!!, klneely@xxxxxxxxxxxxx
writes:

<< Hi, All,
 
   I continue to be plagued by pinholes in the emulsion of all my 4x5
 HIE work.
 
   This time, it was thus:
 
 Tungsten lit, E.I. 125, red #25 filter.
 5 min presoak in distilled water
 11 min in D76 scrupulously maintained at 68 degrees.
 Hand powered rotary agitation in a Jobo 2521 tank. Very gentle ag.
 Stopped in Kodak indicator stop bath for 1 min.
  >>

I would go back to a plain water bath after development in D76 rather Kodak's
indicator stop bath.  Give it a try.  What have you got to lose?  Good luck
*
****
*******
******************************************************
*  To remove yourself from this list, send:          *
*         UNSUBSCRIBE INFRARED                       *
*       to                                           *
*         MAJORDOMO@xxxxx                            *
*----------------------------------------------------*
*   For the IR-FAQ, IR-Gallery and heaps of links:   *
*  http://www.a1.nl/phomepag/markerink/mainpage.htm  *
******************************************************

------------------------------