re: TDC Slide Carriers

[P3D <MDRobb@xxxxxxx>]

Mon, 19 Aug 96 12:21:44 EDT, rdi@xxxxxxx writes:
....
I>'m still wondering what the heck the back slot is for.  Were there slides
>*slightly* bigger (taller?) than Realist? 

The following quote is from the Feburary 1980 edition of "Reel 3-D News":
This should clear up the question of what the rear channel is for.

Marc
mdrobb@xxxxxxx
====================================================
....
Because it was introduced before the Stereo Realist format became
"standard", this model has a very clever slide carrier with two slide
channels.  The one closer to the front of the projector is for the 1 5/8" x
4"
slides of either American or European format.  The rear channel is two 
inches high and will take a standard 2" x 2" stereo slide.  Although
never a "standard" stereo format, this is a logical size, as it is simply
two 2" x 2" 35mm slides with a 1/2" spacer between them.


------------------------------

End of PHOTO-3D Digest 1467
***************************
***************************
 Trouble? Send e-mail to 
 wier@xxxxxxxxxxxxxxx 
 To unsubscribe select one of the following,
 place it in the BODY of a message and send it to:
 listserv@xxxxxxxxxxxxxxx 
   unsubscribe photo-3d
   unsubscribe mc68hc11
   unsubscribe overland-trails
   unsubscribe icom
 ***************************