[photo-3d] Film Reminder

["Kenneth Luker" <kluker@xxxxxxxxxxxxxxxx>]

I use the bottom of the leather case while shooting, also.  
To identify the film I'm using, I stick the torn-off end flap 
from the film box in between the camera bottom and the 
case bottom, sticking it out horizontally toward the front.  I 
leave just enough of the box flap showing to reveal the 
manufacturer (yellow Kodak, green Fuji) and a letter or 
two of the film type, speed and length.  About one quarter 
inch will do it.  If you put the box flap in position just as 
you reattach the case after loading the film, you can 
squeeze the flap between camera and case by putting it 
near the thumb screw as you replace the case.  Then the 
flap won't move around or get lost.
Ken Luker
_______________________________________________________________
Kenneth Luker
Marriott Library Administration
KLUKER@xxxxxxxxxxxxxxxx