Re: [photo-3d] Ricoh KR-10M on eBay

[Peter Davis <pd@xxxxxxxxxxxxx>]

At 12:19 PM 12/02/2000, you wrote:
>Speaking of the shutter release, I have found a great way to
>do this rather easily. It uses a system of power adpater cords
>and plugs from Radio Shack. I use this system for my RBT as
>well. If anyone is interested I can either let you know part
>numbers or I would be willing to make them for you. It does
>take a little soldering for the release button and you have
>several choices there (click open - click close for timed bulb
>shots or simple momentary switch for just a release).
>everything is modular and can be switched and expanded (in
>case you want to go from a one foot base to a twenty foot
>base). Anyway contact me at the address below.

This sounds like the same setup I use for my Ricoh point-and-shoot 
system.  I got the "Y" cable and a straight cable.  I cut the straight 
cable and put a momentary pushbutton on that, plug in the Y cable, and 
connect the two jacks that plug into the cameras.  If I ever get inspired, 
I'll put diodes in to prevent cross-talk, but it basically works perfectly.

-pd


--------
                                 Peter Davis
                  Funny stuff at http://www.pfdstudio.com
                  "The artwork formerly shown as prints."